Videotec DCT - Manual (Page 97)

6.7.5 Patrol
In the Main menu press the PATROL key to enter the menu for carrying out the movement controls.
START PATROL 1…3
To start the corresponding Patrol.
STOP PATROL
To stop the function in progress.
If this function has been started, it can only be stopped by pressing the STOP PATROL key.
If the joystick is moved the dome will continue with the active PATROL.
The settings for the various positions are made using the dome OSM.
6.7.6 Preset, Scan and Home
The PRESET, SCAN and HOME functions are described in sections (§ 4.4.1.1 - PRESET, page 46 and §
4.4.2 - SCAN MENU, page 48).
Refer to § 9.2.1 – Dome, page 165 to check the specific limits of the dome.
The HOME function loads a specific position defined using the Function keys F1/F2.
See the specific handbook for the dome.
6.7.7 Function keys
In the Main menu press the PROG key (see § 4.4.1 - PROG MENU, page 46) and then the key to enter the
menu for carrying out particular controls.
F1
Stores the Home position. F2
Resets the Home position.
See the dome handbook.
Page 95 of 176 MNVADCT03_0716