Videotec DCT User Manual

Page 83

6.3.6

Function keys

In the Main menu, pressing the PROG key (see § 4.4.1 - PROG MENU, page 46) and then the

key, will

enter the menu for carrying out specific commands.

F1
Associated function: “Movement to
the last requested Scan position”.

F2
Associated function: “Movement to the alarm return
position”.

See the dome handbook.

6.3.7

Special codes

Some parameters can be configured by inserting a special code.
Go to the page for inserting special codes (see § 6.1.5 - Layout of the configuration menus, page 76) and use
the keypad to insert the numeric values.

Code

Function

SPEED OF MOVEMENT OF DOME

Variable speed mode

Fixed speed mode

X = 1 ÷ 8: set the fixed speed value (1 = low, 8 = high)

VIDEO SIGNAL

Video signal in colour

B&W video signal

ZOOM / FOCUS SPEED

X = 1 ÷ 8: zoom speed (1 = low, 8 = high)

X = 1 ÷ 8: focus speed (1 = low, 8 = high)

WHITE BALANCE

Automatic

Manual

MOVEMENT LIMITS

Set

Erase

Set

Erase

AUTOSCAN CONTROL

Start normal autoscan

Stop normal autoscan

Page 81 of 176

MNVADCT03_0716