Videotec DCT - Manual (Page 122)

6.13.8 Special codes
Some parameters can be configured by inserting a special code.
Go to the introduction page for Special codes (see §6.1.5 -Layout of the configuration menus, page 76) and
use the keypad to insert the numeric values.
Code Function
10 Zoom preset ON
11 Zoom preset OFF
20 Iris center
30 Els ON
31 Els OFF
40 Awc set
41 Awc reset
50 BLC ON
51 BLC OFF
Page 120 of 176 MNVADCT03_0716