Videotec DCT User Manual
Page 45
4.2.6.6
Touch test
1. Exit menu key
2. Key has been pressed and recognised
The purpose of this display is to test whether the touch screen is calibrated correctly.
If the system has been calibrated correctly, when any key in the grid is pressed, it should change its
appearance to show a viewfinder.
To exit the menu keep the top right button pressed until the system shows the previous menu.
4.2.7
System Information and service menu
Pressing the
key in the Main menu will enter the display showing the general summary of configuration
status and references for the selected device.
Exit menu key
Key for entering the system installer page
Page 43 of 176
MNVADCT03_0716
1
2