Videotec DCT User Manual
Page 81
6.2.6
Preset, Scan e Home
WARNING!
The term ‘Scan’ as used in the dome handbook does not correspond to the commonly used
meaning as in this handbook; for practical purposes the functions take on the 'standard' meaning
and not the one suggested in the dome handbook:
•
‘Scan’ means movement of the pan & tilt to a previously stored position; in the dome
handbook this function is called ‘Preset Call’.
The PRESET, SCAN and HOME functions are described in § 4.4.1.1 - PRESET, page 46 and § 4.4.2 - SCAN
MENU, page 48.
Check § 9.2.1 – Dome, page 165 to find the specific limits for the dome.
6.2.7
Special codes
All the parameters described in the dome handbook can be assigned settings by inserting a special code.
Go to the menu for inserting the special codes (see § 6.1.5 - Layout of the configuration menus, page 76) and
use the keypad to insert the numeric values for the following codes:
Prefix
for
control
Code
Example
ON
1XXX
(1)
“1051”: Playback A ON (XXX = 051)
OFF
2XXX
(1)
“2051”: Playback A OFF (XXX = 051)
SET
4XXX
(1)
“4101”: Left Limit SET (XXX = 101)
SHOT
5XXX
(1)
“5900”: Edit Preset Tour SHOT (XXX = 900)
(1)
XXX = 001÷999
Page 79 of 176
MNVADCT03_0716