Videotec DCT User Manual

Page 148

7.4.2.1

Programme structure

When the programme is started the first graphics window is as follows.

The window is divided into five areas:
Main menu, toolbar and text area. The text
area is in turn divided into two windows (a
reference and an edit window) that can be
selected using the tabs.

1. Main menu
2. Toolbar
3. Selection tabs
4. Reference window
5. Edit window

At this point the user either picks up the strings from the keyboard (by clicking on the

icon) or loads an

existing file (clicking on the

icon). The result of either operation will be a graphics window with the

following appearance:

7.4.2.2

Main menu

This comprises the following fields:

Text
management

Receive from
keyboard

via the serial port, downloads the strings from the keyboard

Load from file

loads the strings saved previously in a file

Send to keyboard

via the serial port, sends the strings to the keyboard

Save on file

saves the file of current strings

Special characters

loads the window of special characters that cannot be selected from
the keyboard

COM Port

for selecting the serial port to be used for transferring the file

Language

for choosing the language used by the programme

Exit

closes the programme without saving the open file

Info

provides information on the programme version

Page 146 of 176

MNVADCT03_0716