Videotec DCT - Manual (Page 40)

4.2.6 Configuration
Position the cursor to correspond with the desired item and press the ” ent ” key.
4.2.6.1 Restore basis values
WARNING
This operation will completely and definitively delete any previously made setting and will return
the keyboard to the factory configuration.
To restore the keyboard default values press the “ ent ” key.
After this operation has been carried out the system will offer the CONFIGURATION menu again.
On completion repeat joystick calibration as described in the corresponding section (see § 4.2.6.3 - Joystick,
page 39) and touch screen calibration as described in the corresponding section (see § 4.2.6.5 - Calibrating
the touch screen, page 40).
Page 38 of 176 MNVADCT03_0716