Videotec DCT User Manual
Page 50
4.4.1.1.3
Delete
PRESET
The Delete PRESET menu is used to delete all the Preset positions stored in the controlled device. This
function is not available in all devices.
Key for confirming complete deletion
4.4.2
SCAN MENU
The SCAN function is used to load the various positions that have been stored previously using the PRESET
function.
The maximum available number of loadable positions depends on the controlled device. See the
corresponding sections for the domes and receivers to check the allowed limits (see § 6 - TELEMETRY, page
71).
Scan to the Home position
Page 48 of 176
MNVADCT03_0716