Videotec DCT - Manual (Page 56)

5.2 No video device to be controlled
This configuration is chosen when you do not wish to control any video devices (matrix, DVR or MUX), but
you need to control only the telemetry.
In the Main menu it will only be possible to select cameras (see § 6.1.2 - Changing camera , page 72).
The table describes how the keyboard should be configured for this particular case. The columns refer to the
fields present in the COMMUNICATIONS/VIDEO submenu (see § 4.2.3.1 - Video, page 22).
Type Protocol Baud rate Address Ext. DVR/MUX
------------ ------------ ------------ (1) ------------
(1) Even when there is more than one keyboard the identification number of each one is irrelevant.
Page 54 of 176 MNVADCT03_0716