Videotec DCT - Manual (Page 21)

4.2 System data area
In the system data area of the main menu there are two keys that are used to enter the following menus:
SYSTEM SETUP
Used to enter the menu for editing all the keyboard parameters
(see § 4.2.1 - System Setup , page 19).
SYSTEM INFO
Used to obtain the most important information about how the system is configured and to enter the
“SERVICE” menu.
(see § 4.2.7 - System Information and service menu, page 43).
4.2.1 System Setup
To prevent changes to keyboard configuration or limit them to authorised personnel only, access
to “System setup” can be restricted by requiring the insertion of a password (see “EDIT
PARAMETERS Password” in § 4.2.5 - Password, page 37).
The menu is used to set up the keyboard operating mode by configuring a series of parameters.
4.2.1.1 Structure of the setup menu
The following is a list of parameter categories that can be configured in this menu, and their corresponding
icons:
LANGUAGE
COMMUNICATIONS
 VIDEO
 TELEMETRY
 SERIAL TESTS
ACCEPTED VALUES
 CAMERAS
 MONITORS/LOCAL DVR/MUX
 CAMERAS EXT.DVR/MUX
 EXTERNAL DVR/MUX
 FUNCTIONS
 COMMON KEYS
PASSWORD
 AT SWITCHING ON
 ALARMS RESET
 PARAM. MODIFICATION
 GRAPH. ENVIR. LEVEL 1
 GRAPH. ENVIR. LEVEL 2
 GRAPH. ENVIR. LEVEL 3
CONFIGURATIONS
 RESTORE BASIS VALUES
 BUZZER/DISPLAY
 JOYSTICK
 TOUCH SCREEN CALIBRATION
 TOUCH TEST
Page 19 of 176 MNVADCT03_0716