Videotec DCT - Manual (Page 72)

5.4.7 VIDEOTEC MUX
This section refers to the following video units:
MUX
SP16C (addressable or non-addressable)
Refer also to the technical information given in § 5.4.1 - Common operations, page 62.
5.4.7.1 Settings for the MUX communication parameters
In the MUX menus make the following parameter settings:
“System setup” menu: select the desired baud rate and (if the MUX is an addressable type)
assign an address between 1 and 64.
See the MUX handbook for further information.
5.4.7.2 Dedicated functions
In addition to the normal procedure for selecting the input videos, the MUX are provided with numerous other
functions that can be loaded using the graphics keys (similar to those present on the local keypad of the video
unit) present in the Main menu of the keyboard.
See the MUX handbook for further information.
VIDEOTEC MUX
Page 70 of 176 MNVADCT03_0716