Videotec DCT User Manual

Page 126

6.15.5

Patrol (Pattern and Apple Peel)

In the Main menu press the PATROL key to enter the menu for carrying out the movement controls.

START PATTERN 1…3
To start the corresponding PATTERN No..

APPLE PEEL
To start the APPLE PEEL function.

Deleting a PATTERN means that it will be assigned the APPLE PEEL function.

6.15.6

Preset, Scan and Home

The PRESET, SCAN and HOME functions are described in sections (§ 4.4.1.1 - PRESET, page 46 and §
4.4.2 - SCAN MENU, page 48).
Refer to § 9.2.1 – Dome, page 165 to check the specific limits of the dome.

6.15.7

Function keys

In the Main menu press the PROG (see § 4.4.1 - PROG MENU, page 46) key and then the

key to enter the

menu for carrying out particular controls.

F1
V-PHASE +

F2
V-PHASE -

See the dome handbook.

6.15.8

Special codes

Some parameters can be configured by inserting a special code.
Go to the page for inserting special codes (see § 6.1.5 - Layout of the configuration menus, page 76) and use
the keypad to insert the numeric values.

Code

Function

RELAYS

All relays Off

Relay 1 On

Relay 2 On

Relay 3 On

Relay 4 On

Relays 1 and 2 On

Relays 1 and 3 On

Page 124 of 176

MNVADCT03_0716