Videotec DCT User Manual
Page 134
![background image](/manuals/413450/134/background.png)
6.17.7
Special codes
Some parameters can be configured by inserting a special code.
Go to the introduction screen for the Special codes (see § 6.1.5 - Layout of the configuration menus, page 76)
and use the keypad to insert the numeric values.
Code
Function
SPEED CURVES
11
First speed curve
12
Second speed curve
13
Third speed curve
14
Fourth speed curve (default)
POSITIONING LIMITS
400
Set the right horizontal positioning limit.
401
Set the left horizontal positioning limit.
402
Set the top vertical positioning limit.
403
Set the bottom vertical positioning limit.
404
Enable the positioning limits.
405
Disable the positioning limits.
HOME POSITION
410
Home position: can be loaded
411
Home position: cannot be loaded
OTHER
1XXX
XXX = 001 ÷ 255: Duration of pause before loading the Home position
2XXX
XXX = 001 ÷ 255: Approach speed to Preset position after a Scan
9999
Reset receiver remote
Page 132 of 176
MNVADCT03_0716