Videotec DCT - Manual (Page 24)

4.2.2 Language
Position the cursor on the desired language and press the “ ent ” key.
The language changes immediately.
4.2.3 Communications
This menu is used to set up the type of devices that will be controlled by the keyboard and to carry out a
procedure to test correct operation of the serial communications.
Select the item of interest and press the “
ent ” key.
4.2.3.1 Video
This menu is used to set up the type of devices that will be connected to the VIDEO connector. Select the item
of interest and press the “
ent ” key.
Page 22 of 176 MNVADCT03_0716