Teledyne GFC-7000E - Trace CO2 Analyzer - Manual (Page 255)

Model 360E Instruction Manual APPENDIX A-5: GFC7000E iDAS Functions, Revision E.0
045840110 Rev B.3 244
Table A-6: MGFC7000E iDAS Functions, Revision E.0
NAME DESCRIPTION UNITS
DETMES Detector measure reading mV
DETREF Detector reference reading mV
RATIO M/R ratio. None
SLOPE1 Slope for range #1 None
SLOPE2 Slope for range #2 None
CO2SLP 5 CO
2
slope None
OFSET1 Offset for range #1 None
OFSET2 Offset for range #2 None
CO2OFS 5 CO
2
offset %
AZERO 1,2 Auto-zero reading M/R
ZSCNC1 Concentration for range #1 during zero/span calibration, just before
computing new slope and offset PPM
ZSCNC2 Concentration for range #2 during zero/span calibration, just before
computing new slope and offset PPM
CO2ZSC 5 CO
2
concentration during zero/span calibration, just before
computing new slope and offset
%
CONC1 Concentration for range #1 PPM
CONC2 Concentration for range #2 PPM
CO2CNC 5 CO
2
concentration %
STABIL Concentration stability PPM
BNTEMP Bench temperature °C
WTEMP Wheel temperature °C
SMPTMP Sample temperature °C
SMPFLW 6 Sample flow cc/m
SMPPRS Sample pressure "Hg
VACUUM 1, 3, 6 Vacuum pressure "Hg
PRGPRS 4 Purge pressure PSIG
BOXTMP Internal box temperature °C
PHTDRV Photometer detector temperature drive mV
TEST7 Diagnostic test input (TEST_INPUT_7) mV
TEST8 Diagnostic test input (TEST_INPUT_8) mV
TEMP4 Diagnostic temperature input (TEMP_INPUT_4) °C
TEMP5 Diagnostic temperature input (TEMP_INPUT_5) °C
REFGND Ground reference (REF_GND) mV
RF4096 4096 mV reference (REF_4096_MV) mV
BNCDTY Bench temperature control duty cycle Fraction
0 = off,
1 = on
WHLDTY Wheel temperature control duty cycle Fraction
1 M300EH.
2 M300ES.
3 M320E.
4 GFC7000E.
5 M306E.
6 Except GFC7000EU (APR version).
7 The units, including the concentration units, are always fixed, regardless of the current instrument
units.