Holdoff feature – Teledyne GFC-7000E - Trace CO2 Analyzer User Manual
Page 123
Model GFC7000E Instruction Manual
Operating Instructions
04584 Rev A1
112
To disable a data channel, follow the instruction shown in section 6.12.2.2 then press:
Edit Data Channel Menu
SETUP X.X
0) CONC: ATIMER, 1, 900
PREV NEXT INS DEL
EDIT
PRNT
EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X
NAME:CONC
SET> EDIT PRINT EXIT SETUP X.X CHANNEL ENABLE:ON EDIT PRINT EXIT ENTR accepts the new setting and returns to the previous menu. EXIT ignores the new setting and returns to the previous menu. SETUP X.X CHANNEL ENABLE:ON OFF ENTR EXIT Toggle key to turn channel ON or OFF Press SET> key until… From the DATA ACQUISITION menu (see Section 6.12.2.2) 6.12.2.11. HOLDOFF Feature The iDAS HOLDOFF feature allows to prevent data collection during calibrations and during the DAS_HOLDOFF period enabled and specified in the VARS (Section 6.8). To enable or disable the : Edit Data Channel Menu SETUP X.X 0) CONC: ATIMER, 1, 900 EDIT PRNT EXIT Exits to the main Data Acquisition menu SETUP X.X NAME:CONC SET> EDIT PRINT EXIT SETUP X.X CAL HOLD OFF:ON EDIT PRINT EXIT ENTR accepts the new setting and returns to the previous menu. EXIT ignores the new setting and returns to the previous menu. SETUP X.X CAL HOLD OFF:ON ON ENTR EXIT Toggle key to turn HOLDOFF ON or OFF Press SET> key until… From the DATA ACQUISITION menu (see Section 6.12.2.2)
HOLDOFF, follow the instruction shown in section 6.12.2.2 then press
PREV NEXT INS DEL
SET>