beautypg.com

Teledyne GFC-7000E - Trace CO2 Analyzer User Manual

Page 21

background image

Model GFC7000E Instruction Manual

Getting Started

04584 Rev A1

10

5. Check the connectors of the various internal wiring harnesses and pneumatic hoses to make

sure they are firmly and properly seated.

6. Verify that all of the optional hardware ordered with the unit has been installed. These are

listed on the paperwork accompanying the analyzer.

7. Once you have determined that no shipping damage exists, and the unit includes all expected

hardware options, remove all red colored shipping screws from the bottom of the chassis as
shown in Figure 3-1.

Shipping

Screws

Figure 3-1: Removal of Shipping Screws

NOTE

Save these shipping screws and re-install them whenever the unit is shipped to another

location.