H3C Technologies H3C Intelligent Management Center - Manual (Page 76)

62
{
Threshold—If you enable the Level-2 threshold, set a level-2 threshold value in the Threshold
field.
{
Trigger Times—If you enable the Level-2 threshold, set an alarm trigger frequency in the Trigger
Times field. When the monitor index meets the level-2 threshold once, the field value increases
by 1. APM generates a level-2 threshold alarm if the monitor index meets the level-2 threshold for
the number of times specified by Trigger Times.
8. Click OK.
Deleting monitor indexes from threshold configuration
You can delete only the monitor indexes for which the threshold alarm function is manually enabled. After
a monitor index is deleted, operators cannot set thresholds for the monitor index on the Threshold Setting
page navigated from an application monitor report page or a custom application monitor report page.
To delete a monitor index:
1. Click the Resource tab.
2. Select Application Manager > Configurations from the navigation tree.
The Configurations page appears.
3. Click Threshold Configuration.
The Global Threshold List appears.
4. Click the Delete icon for the monitor index you want to delete.
5. Click OK.
Configuring a monitor index to use global threshold or custom
threshold
You can configure a monitor index to use a global threshold or custom threshold in the application
monitor report or custom view report. By default, monitor indexes enabled with the threshold alarm
function use global threshold.
To configure a monitor index to use global threshold or custom threshold:
1. Click the Resource tab.
2. Use one of the following methods to open the Threshold Setting page:
Method 1
a. Click Application Management > Application Monitor from the navigation tree.
b. Click the target application name on the application monitor list.
c. Click the Set Threshold icon for the target monitor index on the application monitor report
page.
For a monitor index not enabled with the threshold alarm function, enable the threshold alarm
function for the monitor index. For more information, see "
Adding threshold configuration ."
Method 2
a. Click Application Management > Custom View to open the custom monitor list from the
navigation tree.
b. Click the Monitor Report icon for the target custom monitor on the custom monitor list.