Performance, Figure 622 – H3C Technologies H3C Intelligent Management Center User Manual
Page 716
702
Figure 622 Interface Information area layout
Interface Information area fields:
•
Name—Name of the interface on the storage controller. The value of mgmtportX indicates that the
interface is the management interface of a controller.
•
Health Status—Health status of the interface in the last polling period. Click the Set Threshold icon
to set alarm thresholds for the health status of the interface. Use the global thresholds or custom
thresholds. For information about setting the thresholds, see "
•
Current Rate—Transmission rate of the interface in the last polling period.
•
Max. Rate—Maximum transmission rate that the interface supports.
•
Interface Type—Type of the interface.
•
Target ID—Target ID of the interface. A hyphen (-) indicates that the interface target ID is not
configured or not available.
•
Network Configuration—Network configuration of the interface, including the IP address, gateway
address, subnet mask, and MAC address. A hyphen (-) indicates that the interface network
configuration is not configured or not available.
Performance
The Performance area layout is shown in
Figure 623 Performance area layout
Interface Information area fields:
•
Name—Name of the storage device component.
•
Type—Type of the storage device component.
•
IO Rate—I/O rate of the storage device component in the last polling period.
•
IO Read Rate—I/O read rate of the storage device component in the last polling period.
•
IO Write Rate—I/O write rate of the storage device component in the last polling period.
•
Data Read Rate—Data read rate of the storage device component in the last polling period.
•
Data Write Rate—Data write rate of the storage device component in the last polling period.
•
Data Transfer Rate—Data transfer rate of the storage device component in the last polling period.
•
More—Click More... to view performance information of all storage device components. By default,
the report displays performance information of only the first 10 storage device components when
the storage device has more than 10 components.