Controller information, Interface information – H3C Technologies H3C Intelligent Management Center User Manual
Page 725
711
•
More—Click More... to view storage volume information of all storage volumes. By default, the
report displays storage volume information of only the first 10 storage volumes when the HP MSA
P2000 has more than 10 storage volumes.
Controller Information
The Controller Information area layout is shown in
Figure 633 Controller Information area layout
Controller Information area fields:
•
Name—Name of the storage controller.
•
Health Status—Health status of the storage controller in the last polling period. Click the Set
Threshold icon
to set alarm thresholds for the health status of the storage controller. Use the
global thresholds or custom thresholds. For information about setting the thresholds, see "
•
Manufacture—Manufacturer of the storage controller.
•
Mode—Operating mode of the storage controller.
•
Serial Number—Serial number of the storage controller.
Interface Information
The Interface Information area layout is shown in
.
Figure 634 Interface Information area layout
Interface Information area fields:
•
Name—Name of the interface on the storage controller. The value of mgmtportX indicates that the
interface is the management interface of a controller.
•
Health Status—Health status of the interface in the last polling period. Click the Set Threshold icon
to set alarm thresholds for the health status of the interface. Use the global thresholds or custom
thresholds. For information about setting the thresholds, see "
•
Current Rate—Transmission rate of the interface in the last polling period.
•
Max. Rate—Maximum transmission rate that the interface supports.
•
Interface Type—Type of the interface.
•
Target ID—Target ID of the interface. A hyphen (-) indicates that the interface target ID is not
configured or not available.
•
Network Configuration—Network configuration of the interface, including the IP address, gateway
address, subnet mask, and MAC address. A hyphen (-) indicates that the interface network
configuration is not configured or not available.