H3C Technologies H3C Intelligent Management Center - Manual (Page 504)

490
− Password—Enter the password of the Telnet user.
− Super Password—Enter the super password with which a Telnet user can elevate privileges
after login.
− Timeout (1-60 seconds)—Enter the maximum time period that APM waits for a Telnet
response from the operating system. The value range is 1 to 60 seconds and the default is
4 seconds. If no Telnet response is received from the operating system within the timeout
time, APM considers the interaction a failure.
WMI parameters
− Username—Enter the username of the Windows administrator.
If the administrator is a domain user, use domain name\username.
If the administrator is a local user, use host name\username or IP address\username, or
use username.
− Password—Enter the password of the administrator.
{
File Name—Enter the absolute path and name of the file you want to monitor. Use the
C:\pagefile.sys format for Windows, or the /var/log/messages format for Linux and UNIX.
{
Contact—Enter the contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor.
{
Related Applications—Add the application that the file depends on. Enter the complete or part
of the application monitor name in the Search field at the top of the window, and click Search.
Select the application that the file depends on, and then click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology. APM automatically adds the dependencies
between the file and operating system applications by IP address and displays their
dependencies in the application topology.
{
Detect Application—Select this parameter if you want to enable application detection.
Application detection enables APM to verify connection to the application by using the previous
parameter settings, and to determine whether to add the application monitor based on the
verification result. APM adds the application monitor only when it can connect to the
application. When this parameter is not selected, APM adds the application monitor without
verifying the connection.
5. Click OK.
Modifying a file monitor
Operators can modify all parameters except the IP address of a file monitor. If the IP address of the host
where the monitored file is located changes, operators must add a new application monitor for the file.
However, the new application monitor cannot inherit the history data from the previous application
monitor.
To modify a file monitor:
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.
The application monitor list page displays all application monitors.
3. Click the Modify icon for the file monitor you want to modify.
The page for modifying the file monitor appears.