H3C Technologies H3C WA3600 Series Access Points - Manual (Page 95)

82
a. Select Device > SNMP from the navigation tree.
The Setup page appears.
Figure 76 Enable SNMP
b. Select the Enable option.
c. Select the v3 box.
d. Click Apply.
2. Configure an SNMP view.
a. Click the View tab.
b. Click Add.
The page for creating an SNMP view appears.
Figure 77 Create an SNMP view (1)
c. Enter view1 in the field.
d. Click Apply.
The SNMP rule configuration page appears.