Adding a policy, Configuring classifier-behavior associations for, The policy – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 389
376
Item
Description
Filter
Configure the packet filtering action.
After selecting the Filter option, select one item in the following list:
•
Permit—Forwards the packet.
•
Deny—Drops the packet.
•
Not Set—Cancels the packet filtering action.
Accounting
Configure the traffic accounting action.
Select the Accounting option and select Enable or Disable in the
following list to enable/disable the traffic accounting action.
IMPORTANT:
This configuration item is not supported.
Adding a policy
1.
Select QoS > QoS Policy from the navigation tree.
2.
Click the Add tab to enter the page for adding a policy.
3.
Set the policy name.
4.
Click Add.
Figure 399 Adding a policy
Configuring classifier-behavior associations for the policy
1.
Select QoS > QoS Policy from the navigation tree.
2.
Click the Setup tab to enter the page for setting a policy.