H3C Technologies H3C WA3600 Series Access Points - Manual (Page 295)

282
Item Description
Domain
Select an existing domain from the list.
The default domain is system. To create a domain, select Authentication >
AAA from the navigation tree, click the Domain Setup tab, and enter a new
domain name in the Domain Name field.
• The selected domain name applies to only the current wireless service,
and all clients accessing the wireless service use this domain for
authentication, authorization, and accounting.
• Do not delete a domain name in use. Otherwise, the clients that access
the wireless service are logged out.
Preshared Key
• pass-phrase—Enter a PSK in the form of a character string. You must enter
a string that can be displayed and is of 8 to 63 characters.
• raw-key—Enter a PSK in the form of a hexadecimal number. You must
input a valid 64-bit hexadecimal number.
b. Configure PSK
Figure 279 psk port security configuration page
Table 105 Configuration items
Item Description
Port Mode
psk—An access user must use the pre-shared key (PSK) that is pre-configured
to negotiate with the device. The access to the port is allowed only after the
negotiation succeeds.
Max User
Control the maximum number of users allowed to access the network through
the port.
Preshared Key
• pass-phrase—Enter a PSK in the form of a character string. You must enter
a string that can be displayed and is of 8 to 63 characters.
• raw-key—Enter a PSK in the form of a hexadecimal number. You must
input a valid 64-bit hexadecimal number.
c. Configure userlogin-secure-ext
Perform the configurations as shown in Configure userlogin-secure/userlogin-secure-ext .