Verifying the configuration, Configuration guidelines – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 267
254
Verifying the configuration
After the configuration, select Authentication > Certificate Management > Certificate from the navigation
tree to view detailed information about the retrieved CA certificate and local certificate, or select
Authentication > Certificate Management > CRL from the navigation tree to view detailed information
about the retrieved CRL.
Configuration guidelines
When you configure PKI, note the following guidelines:
•
Make sure the clocks of entities and the CA are synchronous. Otherwise, the validity periods of
certificates are abnormal.
•
The Windows 2000 CA server has some restrictions on the data length of a certificate request. If the
PKI entity identity information in a certificate request goes beyond a certain limit, the server does
not respond to the certificate request.
•
The SCEP plug-in is required when you use the Windows Server as the CA. In this case, you must
specify RA as the authority for certificate request when configuring the PKI domain.
•
The SCEP plug-in is not required when you use the RSA Keon software as the CA. In this case, you
must specify CA as the authority for certificate request when configuring the PKI domain.