H3C Technologies H3C WA3600 Series Access Points - Manual (Page 261)

248
2. Click the Certificate tab to enter the page displaying existing PKI certificates.
3. Click Request Cert to enter the local certificate request page.
Figure 243 Local certificate request page
4. Configure the parameters as described in Table 94 .
Table 94 Configuration items
Item Description
Domain Name Select the PKI domain for the certificate.
Password Type the password for certificate revocation.
Enable Offline Mode
Select this box to request a certificate in offline mode, that is, by an out-of-band
means like FTP, disk, or email.
5. Click Apply.
If you select the online mode, the system gives a prompt that the request is submitted. In this case,
click Apply again to finish the operation. If you select the offline mode, the offline certificate
request information page appears. In this case, you must submit the information by an out-of-band
way to the CA to request a local certificate.
Figure 244 Offline certificate request information page
Retrieving and displaying a CRL
1. Select Authentication > Certificate Management from the navigation tree.