H3C Technologies H3C WA3600 Series Access Points - Manual (Page 79)

66
User management configuration
In the user management part, you can perform the following configuration:
• Create a local user, and set the password, access level, and service type for the user.
• Set the super password for switching the current web user level to the management level.
• Switch the current web user access level to the management level.
Creating a user
1. Select Device > Users from the navigation tree
2. Click the Create tab.
The page for creating local users appears.
Figure 58 Create a user
3. Configure the user information as described in Table 33 .
4. Click Apply.
Table 33 Configuration items
Item Description
Username Set the username for a user.