H3C Technologies H3C WA3600 Series Access Points - Manual (Page 24)

11
Item Description
Preshared Key Type
• pass-phrase—Enter a PSK in the form of a character string. You should enter a
string that can be displayed and is of 8 to 63 characters.
• raw-key—Enter a PSK in the form of a hexadecimal number. You must enter a
valid 64-bit hexadecimal number.
Preshared Key Allows you to configure a preshared key.
Radio configuration
Figure 9 Radio configuration page
Table 10 Configuration items
Item Description
Radio Select the radio unit for the AP. The radio unit depends on the AP model.
Mode Select the radio mode. The radio mode depends on the AP model.
Channel
Select the channel to be used.
The channel list for the radio depends on the country code and radio mode, and
varies with device models.
Auto: Specifies the automatic channel mode. With Auto specified, the AP
evaluates the quality of channels in the wireless network, and selects the best
channel as the working channel.
After the channel is changed, the power list is refreshed.
Power
Select the transmission power.
The maximum power of the radio depends on the country code, working channel,
AP model, radio mode, and antenna type. If 802.11n is specified as the radio
mode, the maximum power of the radio also depends on the bandwidth mode.
Select a radio unit and bind the wireless service specified in " Wireless configuration " to the specified radio unit.
NOTE:
Set appropriate radio mode, working channel, and power as needed for a radio unit. These settings take effect
only after you bind the wireless service to the specified radio unit.