H3C Technologies H3C WA3600 Series Access Points - Manual (Page 366)

353
2. Click the Add tab to enter the IPv4 ACL adding page.
Figure 387 Adding an IPv4 ACL
3. Configure the IPv4 ACL information as described in Table 112 .
4. Click Apply.
Table 112 Configuration items
Item Description
ACL Number Set the number of the IPv4 ACL.
Match Order
Set the match order of the ACL:
• Config—Packets are compared against ACL rules in the order that the rules are
configured.
• Auto—Packets are compared against ACL rules in the depth-first match order.
Description Set the description for the ACL.
Configuring a rule for a basic IPv4 ACL
1. Select QoS > ACL IPv4 from the navigation tree.
2. Click the Basic Setup tab to enter the rule configuration page for a basic IPv4 ACL.