beautypg.com

Trace route operation – H3C Technologies H3C WA3600 Series Access Points User Manual

Page 168

background image

155

Figure 159 IPv6 ping operation results

Trace route operation

NOTE:
•

The web interface does not support trace route on IPv6 addresses.

•

Before performing the trace route operations, execute the ip ttl-expires enable command on the
intermediate device to enable the sending of ICMP timeout packets and the ip unreachables enable

command on the destination device to enable the sending of ICMP destination unreachable packets.

1.

Select Diagnostic Tools > Trace Route from the navigation tree.

2.

Click the Trace Route tab to enter the Trace Route configuration page, as shown in

Figure 160

.

This manual is related to the following products:
See also other documents in the category H3C Technologies Routers: