H3C Technologies H3C WA3600 Series Access Points - Manual (Page 110)

97
3. Click the icon for the port to be modified to enter the page as shown in Figure 96 .
Figure 96 Modify a port
4. Configure the port as described in Table 47 .
5. Click Apply.
Table 47 Configuration items
Item Description
Port Display the port to be modified.
Untagged Member Display the VLAN(s) to which the port belongs as an untagged member.
Tagged Member Display the VLAN(s) to which the port belongs as a tagged member.
Member
Type
Untagged. Set the target member type of the port.
Select the Untagged, Tagged, or Not a Member option:
• Untagged: Indicates that the port sends the traffic of the VLAN with the VLAN tag
removed.
• Tagged: Indicates that the port sends the traffic of the VLAN without removing the
VLAN tag.
• Not a Member: Removes the port from the VLAN.
IMPORTANT:
• You cannot configure an access port as an untagged member of a nonexistent
VLAN.
• When you configure an access port as a tagged member of a VLAN, or
configure a trunk port as an untagged member of multiple VLANs in bulk, the link
type of the port is automatically changed into hybrid.
• You can configure a hybrid port as a tagged or untagged member of a VLAN
only if the VLAN is an existing, static VLAN.
Tagged.
Not a
Member.
VLAN ID Specify the VLAN to which the port belongs.