Verifying the configuration, Configuration guidelines – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 230
217
Figure 213 Configure an accounting method for the ISP domain
6.
Enable the Telnet service:
a.
From the navigation tree, select Network > Services.
b.
Select the Enable Telnet service box.
c.
Click Apply.
Figure 214 Enable the Telnet service
7.
Log in to the CLI and configure the AP to use AAA for Telnet users.
[AP] user-interface vty 0 4
[AP-ui-vty0-4] authentication-mode scheme
[AP-ui-vty0-4] quit
Verifying the configuration
Telnet to the AP and enter the username hello@bbb and password abc. You can log in and access
commands of levels 0 through 3.
Configuration guidelines
When you configure the RADIUS client, follow these guidelines:
•
Accounting for FTP users is not supported.
This manual is related to the following products: