H3C Technologies H3C WA3600 Series Access Points - Manual (Page 343)

330
g. Disable Handshake and Multicast Trigger (recommended).
h. Click Apply.
Figure 353 Security setup
6. Bind an AP radio to a wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Click the Bind link at the right side of the wireless service dot1x to enter the page as shown
in
Figure 354 .
c. Select the box with radio mode 802.11n(2.4GHz).
d. Click Bind.
Figure 354 Bind an AP radio
7. Enable the wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Select the dot1x box.
c. Click Enable.