H3C Technologies H3C WA3600 Series Access Points - Manual (Page 41)

28
Field Description
HT protection mode
802.11n protection modes:
• no protection mode(0)—The clients associated with the AP,
and the wireless devices within the coverage of the AP
operate in 802.11n mode, and all the clients associated with
the AP operate in either 40 MHz or 20 MHz mode.
• Non-member mode(1)—The clients associated with the AP
operate in 802.11n mode, but non-802.11n wireless devices
exist within the coverage of the AP.
• 20 MHz mode(2)—The radio mode of the AP is 40 MHz.
The clients associated with the AP and the wireless devices
within the coverage of the AP operate in 802.11n mode, and
at least one 802.11n client operating in 20 MHz mode is
associated with the radio of the AP.
• Non-HT mix mode(3)—All situations except the above three.
power(dBm) Transmit power of the interface (in dBm).
Antenna Type Antenna type, which depends on the device model.
Resource Usage Current radio resource usage.
Received: 2 authentication frames, 2
association frames
Number of authentication and association frames received.
Sent out: 2 authentication frames, 2
association frames
Number of authentication and association frames sent.
Stations: 0 associating, 2 associated
Number of stations being associating and stations having been
associated.
Input : 70686 packets, 6528920 bytes
: 255 unicasts, 34440 bytes
: 70461 multicasts/broadcasts,
6494480 bytes
: 0 fragmented
: 414 discarded, 26629 bytes
: 0 duplicates, 3785 FCS errors
: 0 decryption errors
Input packet statistics of the interface:
• Number of packets, number of bytes.
• Number of unicast packets, number of bytes of unicast
packets.
• Number of multicasts/broadcast packets, number of bytes
of multicasts/broadcast packets.
• Number of fragmented packets.
• Number of discarded packets, number of discarded bytes.
• Number of duplicate frames, number of FCS errors.
• Number of encryption errors.