H3C Technologies H3C WA3600 Series Access Points - Manual (Page 152)

139
Configuring the AP
1. Enable dynamic DNS:
a. Select Network > DNS from the navigation tree.
b. Click the Dynamic tab to enter the page shown in Figure 143 .
c. Select the Enable option for Dynamic DNS.
d. Click Apply.
Figure 143 Enable dynamic DNS
2. Configure the IP address of the DNS server:
a. In Figure 143 , click Add IP to enter the page for adding a DNS server IP address, as shown
in Figure 144 .
b. Enter the IP address 2.1.1.2.
c. Click Apply.
Figure 144 Add a DNS server IP address
3. Add a domain name suffix:
a. In Figure 143 , click Add Suffix.
b. Enter the domain name suffix com as shown in Figure 145 .