Verifying the configuration – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 418
405
b.
Make sure that WMM is enabled.
Figure 430 Wireless QoS configuration page
c.
Select the radio unit to be configured on the list and click the
icon to enter the page for
configuring wireless QoS.
d.
On the Client EDCA list, select the priority type (AC_VO, for example) to be modified, and click
the
icon to enter the page for setting client EDCA parameters.
e.
Select Enable from the CAC list.
f.
Click Apply.
Figure 431 Enabling CAC
g.
Enable CAC for AC_VI in the same way. (Details not shown.)
h.
Select QoS > Wireless QoS from the navigation tree.
By default, the QoS Service tab is displayed.
i.
Click the
icon for the desired radio unit to enter the page for configuring wireless QoS.
j.
Select the Client Number option, and then enter 10.
k.
Click Apply.
Figure 432 Setting CAC client number
Verifying the configuration
If the number of existing clients in the high-priority access categories (AC-VO and AC-VI) plus the number
of clients requesting for high-priority access categories is smaller than or equal to the user-defined