Dhcp server configuration example, Network requirements, Configuration procedure – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 143
130
Table 59 Field description
Item Description
IP Address
Assigned IP address.
Client MAC Address/Client ID Client MAC address or client ID bound to the IP address.
Pool Name
Name of the DHCP address pool where the IP address belongs.
Lease Expiration
Lease time of the IP address.
DHCP server configuration example
Network requirements
As shown in
, DHCP clients on subnet 10.1.1.0/24 obtain IP addresses dynamically from the
DHCP server (AP). The IP address of VLAN-interface 1 of the AP is 10.1.1.1/24.
In subnet 10.1.1.0/24, the address lease duration is ten days and twelve hours and the gateway address
is 10.1.1.2.
Figure 130 Network diagram (on a fat AP)
Configuration procedure
1.
Enable DHCP:
a.
Select Network > DHCP from the navigation tree to enter the default DHCP Server page.
b.
Select the Enable option in the DHCP Service field, as shown in
.
DHCP client
AP
DHCP server
Vlan-int1
WLAN-BSS1
10.1.1.1/24
DHCP client
DHCP client
Vlan-int1
WLAN-BSS2
10.1.1.1/24
Vlan-int1
10.1.1.1/24
Eth1/1
10.1.1.2/24