Configuring switch, Configuration guidelines, Shown in – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 112: Figure 99
99
Figure 99 Configure GigabitEthernet 1/0/1 as a tagged member of VLAN 2 and VLANs 6 through 50
d.
Click Apply. A dialog box appears asking you to confirm the operation.
e.
Click OK in the dialog box.
3.
Configure GigabitEthernet 1/0/1 as an untagged member of VLAN 100:
a.
Click the
icon of GigabitEthernet 1/0/1.
b.
Select the Untagged option and enter VLAN ID 100, as shown in
c.
Click Apply.
Figure 100 Configure GigabitEthernet 1/0/1 as an untagged member of VLAN 100
Configuring Switch
Configure Switch in the same way as you configured the AP.
Configuration guidelines
When you configure VLAN, follow these guidelines:
This manual is related to the following products: