H3C Technologies H3C WA3600 Series Access Points - Manual (Page 308)

295
3. Bind an AP radio to a wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Click the Bind link at the right side of the wireless service service1 to enter the page as shown
in
Figure 297 .
c. Select the box with radio mode 802.11n(2.4GHz).
d. Click Bind.
Figure 296 Bind an AP radio
4. Enable the wireless service
a. Select Wireless Service > Access Service from the navigation tree to enter the page for enabling
wireless service.
b. Select the service1 box.
c. Click Enable.
Figure 297 Enable the wireless service
5. Optional: Enable 802.11n radio (By default, 802.11n(2.4GHz) radio is enabled.)
Select Radio > Radio from the navigation tree to enter the Radio page, as shown in
Figure 298 .
Make sure 802.11n(2.4GHz) radio is enabled.