H3C Technologies H3C WA3600 Series Access Points - Manual (Page 92)

79
Item Description
Authentication Password Set the authentication password when the security level is Auth/NoPriv or
Auth/Priv.
The confirm authentication password must be the same with the
authentication password..
Confirm Authentication Password
Privacy Mode
Select a privacy mode (including DES56, AES128, and 3DES) when the
security level is Auth/Priv.
Privacy Password Set the privacy password when the security level is Auth/Priv.
The confirm privacy password must be the same with the privacy
password..
Confirm Privacy Password
ACL
Associate a basic ACL with the user to restrict the source IP address of
SNMP packets, that is, you can configure to allow or prohibit SNMP
packets with a specific source IP address, so as to allow or prohibit the
specified NMS to access the agent by using this user name.
Configuring SNMP trap function
1. Select Device > SNMP from the navigation tree.
2. Click the Trap tab.
The trap configuration page appears.
Figure 72 Traps configuration
3. Select the box of Enable SNMP Trap.
4. Click Apply.
5. Click Add.
The page for adding a target host of SNMP traps appears.