H3C Technologies H3C WA3600 Series Access Points - Manual (Page 89)

76
Figure 68 SNMP group
3. Click Add.
The Add SNMP Group page appears.
Figure 69 Create an SNMP group
4. Configure SNMP group settings as described in Table 40 .
5. Click Apply.
Table 40 Configuration items
Item Description
Group Name Set the SNMP group name.
Security Level
Select the security level for the SNMP group. The available security levels are:
• NoAuth/NoPriv: No authentication no privacy.
• Auth/NoPriv: Authentication without privacy.
• Auth/Priv: Authentication and privacy.
Read View Select the read view of the SNMP group.
Write View
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write operations to all MIB
objects on the device.