H3C Technologies H3C WA3600 Series Access Points - Manual (Page 384)

371
Item Description
DSCP
Define a rule to match DSCP values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight DSCP values each time. If multiple identical DSCP
values are specified, the system considers them as one. The relationship
between different DSCP values is OR. After such configurations, all the DSCP
values are arranged in ascending order automatically.
IP Precedence
Define a rule to match IP precedence values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight IP precedence values each time. If multiple
identical IP precedence values are specified, the system considers them as one.
The relationship between different IP precedence values is OR. After such
configurations, all the IP precedence values are arranged in ascending order
automatically.
Classifier
Define a rule to match a QoS class.
IMPORTANT:
This configuration item is not supported.
Inbound Interface
Define a rule to match inbound interfaces.
IMPORTANT:
This configuration item is not supported.
RTP Port
Define a rule to match a range of RTP ports.
Specify the start port in the from field and the end port in the to textbox.
IMPORTANT:
This configuration item is not supported.
Dot1p
Service 802.1p
Define a rule to match the service 802.1p precedence values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight Dot1p values each time. If multiple identical
Dot1p values are specified, the system considers them as one. The relationship
between different Dot1p values is OR. After such configurations, all the Dot1p
values are arranged in ascending order automatically.
IMPORTANT:
This configuration item is not supported.
Customer
802.1p
Define a rule to match the customer 802.1p precedence values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight Dot1p values each time. If multiple identical
Dot1p values are specified, the system considers them as one. The relationship
between different Dot1p values is OR. After such configurations, all the Dot1p
values are arranged in ascending order automatically.