H3C Technologies H3C WA3600 Series Access Points - Manual (Page 442)

429
NOTE:
At present, these attacks can be detected through a dynamic blacklist: Assoc-Flood, Reassoc-Flood,
Disassoc-Flood, ProbeReq-Flood, Action-Flood, Auth-Flood, Deauth-Flood, and NullData-Flood.
Configuring static blacklist
1. Select Security > Filter from the navigation tree.
You will enter the Blacklist tab.
2. Click the Static tab.
3. Click Add Static.
Figure 464 Configuring static blacklist
4. Add a static blacklist as described in Table 145 .
5. Click Apply.
Table 145 Configuration items
Item Description
MAC Address Select MAC Address, and then add a MAC address to the static black list.
Select Current Connect
Client If you select the box, the table below lists the current existing clients. Select the
boxes of the clients to add their MAC addresses to the static blacklist.
Configuring white list
1. Select Security > Filter from the navigation tree.
2. Click the Whitelist tab.
3. Click Add.