H3C Technologies H3C WA3600 Series Access Points - Manual (Page 367)

354
Figure 388 Configuring an basic IPv4 ACL
3. Configure a basic IPv4 ACL as described in Table 113 .
4. Click Add.
Table 113 Configuration items
Item Description
ACL
Select the basic IPv4 ACL for which you want to configure rules.
Available ACLs are basic IPv4 ACLs.
Rule ID
Select the Rule ID option and enter a number for the rule.
If you do not specify the rule number, the system assigns one automatically.
IMPORTANT:
If the rule number you specify already exists, the following operations modify the
configuration of the rule.
Action
Select the action to be performed for IPv4 packets matching the rule:
• Permit—Allows matching packets to pass.
• Deny—Drops matching packets.
Check Fragment
Select this option to apply the rule to only non-first fragments.
If you do no select this option, the rule applies to all fragments and non-fragments.