H3C Technologies H3C WA3600 Series Access Points User Manual
Page 15
2
Table 2 Feature matrix
Module Feature
WA2600
series
WA3600 series
Device
Optical Ethernet interface
Supported on the
WA2620X-AGNP
Not supported.
Device maintenance
The "File Type" and "If a file
with the same name already
exists, overwrite it without
any prompt" options in
software upgrade are
supported on the
WA2610i-GN and
WA2620i-AGN.
The "File Type" and "If a
file with the same name
already exists, overwrite it
without any prompt"
options in software
upgrade are supported.
Interface management
Configuration of IPv6
address for an interface is
supported.
The maximum Ethernet
frame length allowed by an
Ethernet interface is 1536
bytes for the
WA2610-AGN,
WA2612-AGN, and
WA2620-AGN and 1600
bytes for the other models.
Configuration of IPv6
address for an interface is
supported.
The maximum Ethernet
frame length allowed by
an Ethernet interface is
1600 bytes.
Wireless service
Fast association
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
Radio
Radio
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP model.
To check whether a radio
mode is supported, see the
corresponding list on the
web page.
802.11n bandwidth mode
is supported.
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP
model. To check whether a
radio mode is supported,
see the corresponding list
on the web page.
802.11n bandwidth
mode is supported.
Rate
Support for
802.11a/b/g/n depends
on your AP model.
If a radio mode is not
supported, it is displayed as
gray on the web page.
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP
model.
If a radio mode is not
supported, it is displayed
as gray on the web page.
MCS index
Up to 15.
Up to 23.
Advanced settings Band navigation
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.