H3C Technologies H3C WA3600 Series Access Points - Manual (Page 51)

38
Item Description
File Type
Specify the type of the boot file for the next boot:
• Main—Boots the device.
• Backup—Boots the device when the main boot file is unavailable.
IMPORTANT:
Support for this option depends on your device model. For more information, see
"Feature matrix."
If a file with the same
name already exists,
overwrite it without any
prompt
Specify whether to overwrite the file with the same name.
If you do not select the option, when a file with the same name exists, the system
prompts "The file has existed.", and you cannot upgrade the software.
IMPORTANT:
Support for this option depends on your device model. For more information, see
"Feature matrix."
Reboot after the
upgrade is finished. Specify whether to reboot the device to make the upgraded software take effect
after the application file is uploaded.
Reboot
CAUTION:
•
Before rebooting the device, save the configuration. Otherwise, all unsaved configurations are lost after
device reboot.
• Re-log in to the web interface after the device reboots.
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Reboot tab.
The device reboot configuration page appears.
Figure 36 Device reboot page
3. Select or clear the box before "Check configuration with next startup configuration file".
4. Click Apply.
The reboot confirm dialog box appears.
5. Click OK.