H3C Technologies H3C WA3600 Series Access Points - Manual (Page 153)

140
c. Click Apply.
Figure 145 Add a domain name suffix
Verifying the configuration
Use the ping host command on the AP to verify that the communication between the AP and the host is
normal and that the corresponding destination IP address is 3.1.1.1.
1. Select Diagnostic Tools > Ping from the navigation tree to enter the IPv4 Ping configuration page.
2. Enter host in the Destination IP address or host name field.
3. Click Start to execute the ping command
4. View the result in the Summary field.
Figure 146 Ping operation