H3C Technologies H3C WA3600 Series Access Points - Manual (Page 129)

116
Figure 118 Create an IPv4 static route
3. Specify relevant information as described in Table 54 .
4. Click Apply.
Table 54 Configuration items
Item Description
Destination IP Address
Enter the destination host or network IP address, in dotted decimal
notation.
Mask
Enter the mask of the destination IP address.
You can enter a mask length or a mask in dotted decimal notation.
Preference
Set a preference value for the static route. The smaller the number, the
higher the preference.
For example, specifying the same preference for multiple static routes to
the same destination enables load sharing on the routes, while specifying
different preferences enables route backup.
Next Hop Enter the next hop IP address, in dotted decimal notation.