H3C Technologies H3C WA3600 Series Access Points - Manual (Page 410)

397
NOTE:
•
ECWmin cannot be greater than ECWmax.
• If all clients operate in 802.11b radio mode, set TXOPLimit to 188 and 102 for AC-VI and AC-VO.
• If some clients operate in 802.11b radio mode and some clients operate in 802.11g radio mode in the
network, H3C recommends the TXOPLimit parameters in
Table 131 .
• Once you enable CAC for an access category, it is enabled automatically for all higher priority access
categories. For example, if you enable CAC for AC-VI, CAC is also enabled for AC-VO. However,
enabling CAC for AC-VO does not enable CAC for AC-VI.
Displaying radio statistics
1. Select QoS > Wireless QoS from the navigation tree.
2. Click the Radio Statistics tab to enter the page displaying radio statistics.
3. Click a radio to see its details.
Figure 422 Displaying radio statistics
Table 132 Field description
Field Description
Radio interface WLAN radio interface.
Client EDCA update count Number of client EDCA parameter updates.
QoS mode
WMM indicates that QoS mode is enabled; None indicates
that QoS mode is not enabled.
Radio chip QoS mode Radio chip's support for the QoS mode.
Radio chip max AIFSN Maximum AIFSN allowed by the radio chip.
Radio chip max ECWmin Maximum ECWmin allowed by the radio chip.