H3C Technologies H3C WA3600 Series Access Points - Manual (Page 234)

221
Table 85 Configuration items
Configuration item Description
Server Type
Select the type of the server to be configured, which can be Authentication
Server, Authorization Server and Accounting Sever.
Primary Server IP
Enter the IP address of the primary server.
When no primary server is specified, the primary server IP address and the
primary server TCP port are empty.
If you leave the IP address field empty, it means the primary server (if configured)
will be removed.
The specified IP address of the primary server cannot be the same as that of the
secondary server.
Primary Server TCP Port
Enter the TCP port of the primary server.
You must configure different TCP port numbers for different service types.
Secondary Server IP
Enter the IP address of the secondary server.
When no secondary server is specified, the secondary server IP and the
secondary server TCP port are empty.
If you leave the IP address field empty, it means the secondary server (if
configured) will be removed.
The specified IP address of the primary server cannot be the same as that of the
secondary server.
Secondary Server TCP Port
Enter the TCP port of the secondary server.
You must configure different TCP port numbers for different service types.
Shared Key
Select the box and enter the shared key of the server in the field.
The HWTACACS client (the NAS) and HWTACACS server use the MD5
algorithm to encrypt packets exchanged between them and a shared key to
verify the packets. Only when the same key is used can they properly receive the
packets and make responses.
Confirm Shared Key
Enter the shared key for confirmation, which must be consistent with the shared
key.
Configuring HWTACACS parameters
1. Select Authentication > HWTACACS from the navigation tree.
2. Click the Parameter Configuration tab.